When it comes to safety in your home, there are thousands of ways to ensure that your family is free of harm. When it comes to the garage area, people tend to fret about their garage doors. There are many tales of children getting stuck under the garage door, or it becoming loose on its rails and smacking an unsuspecting garage dweller. The truth of the matter is, garage doors have come a long way in terms of safety, especially since the 1990s, when new laws came into place stating that a garage door must contain numerous safety fall back features. This brief article will give you the lowdown on some of the safety features you might find on your garage door, as well as some advice on how to go about testing such features.
Safety Features Your Garage Door Might Have
As aforementioned, modern garage doors tend to come equipped with a wide range of safety features, as opposed to the completely analog based doors of yore. One of the first safety precautions that became standard on electronic garage doors was the automatic reverse. If your garage door is in transit to the close position and happens to come into contact with something, it will automatically reverse itself into the upright position.
Motion sensors are a safety precaution that works much like the automatic reverse does. The motion detectors are a set of sensors installed on either side of the garage door. If the door is in transit to the close position and the sensors pick up movement, it will automatically begin to slide up again.
Finally, the manual release mechanism will actually detach the garage door from the mechanism that allows it to close, meaning the door will become stuck in the position that it was currently in when the release handle is pulled.
Testing The Features
The automatic reverse is usually tested by placing an empty cardboard box underneath the pathway of the garage door. If the door touches the box and then reverses direction, it is working just fine. If the box is crushed, then you have a bit of a problem on your hands, as your safety precaution is not working properly.
The motion detectors work quite similarly. Make sure the door is in a completely upright position, then begin to close it using the automatic garage door opener. While it is closing, quickly wave your hand in front of the sensors. If the door does not reel back into the upright position, you should definitely have it checked out.
The manual release mechanism is quite easy to test. Simply begin to close the door using the automatic garage door opener. As the door is closing, turn or pull the release; if the garage door stops closing, then this safety measure is working properly, if not, it's time to call a repair person.
Staying Safe Beyond Built-In Features
Beyond the built-in features that your garage door has, there is one element that you can bring to the table that no technology can replace: diligence. It is important to keep your eyes opened and your ears peeled whenever you are operating your garage door. Make sure that people, pets, and any items of note are out of the way of the garage door's path before closing it. Although these safety features are quite reliable, you never know what sort of contingencies might cause them to fail; as such, it is important for you to watch out on your own and stay on top of testing your garage door's safety features.
Your garage door's safety features are in your service. Don't forget to test them with some degree of frequency. To learn more about maintaining your garage door and making sure it functions safely, you can pop over to this website.